The new Garbage Collector 3 is finally here.
The Garbage Collector 3 is smaller than its predecessor. It’s only 72 x 58 x 28 mm (including the sockets). It also has an Config-Switch to set the MIDI channel and fool around with the basic function without an MIDI controller.
Besides that, the Oscillator Devices Garbage Collector is a MIDI controllable expression pedal and footswitch in one device. Effects devices with expression pedal inputs or inputs for external foot switches (e.g. tap tempo on guitar pedals) can be controlled automatically by the Garbage Collector via MIDI. The Garbage Collector can be synchronized with MIDI clock and thus synchronize time-based effects. It can emulate either a foot switch with tip and ring or an expression pedal at both outputs. The two sockets are insulated to avoid ground loops. The MIDI channel is adjustable and complex switching functions can be combined in presets.
More Informationen at: https://oscillatordevices.com/garbage-collector/
The Garbage Collector 3 is able to switch +5V. If higher voltages or negative voltages are to be switched (e.g. amp switching), this must be set using a switch on the inside. The expression function is then not available on this port.