Description
The Oscillator Devices SIREN is a Stereo MIDI Volume Controller. Its two fully analog channels can be independently set from -96dB (Mute) to a whooping +32dB boost. The channels can be split before, or mixed after the volume control. The SIREN has high quality, low noise buffers and is specifically designed to not color your tone.
The SIREN has two internal LFOs to drive the volume control. That makes it a full blown MIDI Controlled Analog Stereo Tremolo. Both LFOs operate completely independent. Different waveforms (Sine, Triangle, Rectangle and Ramp in both directions) can either be free running from 100ms to 1.2s, or can be synced to MIDI clock.
On top of that the SIREN supports Fade and Swell functions. While Fade slowly fades to another volume, the Swell function snaps back to the original volume when done, ready to be triggered again.
More informations at: https://oscillatordevices.com/siren
The Siren is temporary out of stock. Since there will be some small improvements, this can take a few weeks. Expect it to be back in mid September. You can pre-order now and it’ll be shipped as soon as the next batch is ready. Sorry for the inconvenience.
The improvements will be:
- TRS compatibility: Use either two mono TS or a single TRS on channel A
- Parallel Mode: Besides Split and Mix there is a mode for a parallel blend. The input signal on channel A goes unprocessed to the output of channel A. The input of channel B is mixed with the signal of channel A. This way an effects device can be put between the output of channel A (send) and input of channel B (return) and the signal is blended with the dry signal. Volume of A controls the volume of the dry signal, Volume B controls the wet effect.
